Microsemi 4-Pairs High Power splitter - for use with PD-9500G series (user selectable DC output 12v /
PowerDsine's PD-AS-951 High-Power active splitters enable data terminals that were not originally designed to accept power from the Ethernet, to be powered by Power over Ethernet midspans. The PDAS-951 High Power splitter (user selectable 12V or 24V) can power devices such as WiMAX CPEs, small WiMAX base-stations, 802.11n Access-Points, Thin-Clients, PTZ (Pan / Tilt / Zoom) IP Cameras, VideoPhones and more.
Many contemporary terminals are designed and deployed without the ability to accept power via their LAN input. Such devices can only accept power through their DC jack while their RJ45 input accepts only data. Moreover, such devices might only accept voltage levels lower than the PoE standard minimum voltage (44v in IEEE802.3af / 50v in 802.3at). Using the PD-AS-951 high power splitter, these terminals immediately become PoE-ready without any modification required on their side. it physically splits the data and power streams, arriving over a single cable, into two separate cords (LAN & DC) which go directly to the data terminal. Voltage regulation is also performed to the level required by the terminal (12V or 24V).
|Electromagnetic compatibility||FCC Part 15 Class A, EN55022 (CISPR 22) Class A, EN55024 (CISPR 24)|
|Compliant with standards||IEEE802.3af, IEEE802.3at|
|Dimensions (WxDxH)||130 x 73 x 38mm|
|Temperature range||-20 - 70 ° C|
|Operating temperature range||0 - 40 ° C|
|Ethernet LAN ports quantity (RJ-45)||2|
|Operating humidity range||10 - 90%|
|Power over Ethernet (PoE) support||Yes|
|Wiring technology||10/100 / 1000BaseT|
|Ethernet interface type||Gigabit Ethernet|
|Humidity||5 - 95%|
|Ethernet LAN transfer speed||10,100,1000 Mbit / s|
|Input voltage||44 - 57|